Archive for February, 2012
Equipment , Equipment for boiler houses / power plants

JSC “Gandras Energoefektas” - design, supply, warranty service of electricity and heat supply plants.
Any electricity supply source building up purpose – ensure uninterrupted electricity supply and save on electricity purchase.
If you need and have a serious intention to build up your own heat and electricity source, please contact us and we together with you will evaluate existing equipment, offer to your choice 1-2 electricity sources, and will help you to prepare feasibility study documentation for the Bank.
We can supply to You equipment package, fulfill design, installation and start-up works, train Your personal.
Biomass firing plants are working with renewable energy sources, this permit to sell produced electricity at higher price (as “green” electricity), but at the same time it applies restriction on produced heat energy after steam turbine and electrical energy ratio (it should be not less than 23 %).
We offer the operatio visualization automated systems, which are constructed in terms of programmed digital controllers for automatic control of the STEAM, GAS and HYDRO-TURBINES, COOLING SYSTEMS, OIL FEEDING, VENTILATION equipment, information acquistion and handling, and also warning system.
Equipment , Equipment for boiler houses / power plants , Boilers , Biomass boilers
Company “GANDRAS ENERGOEFEKTAS” offers biomass fired boilers.
In EU countries in primary energy producing biomass usage is quite high (66.1 %) comparing with other renewable energy, and takes the third place on electricity production, yielding to hydro- and wind-power engineering.
Biomass is:
- wood,
- vine (fast-growing trees, such as poplars, willows, and grasses, such as millet),
- woodworking wastes (bark, sawdust, boards cuttings, shaving),
- agriculture wastes (sugar-cane cake, maize (corn) roots and stems, rise husk, straw, nutshell),
- used paper.11
Our offered boilers range include:
- Small capacity boilers up to 5 MW
- Medium capacity boilers from 7 MW up to 75 MW
- Pre-assembled biomass boiler-room with silo in containers
Equipment for boiler houses / power plants , Boilers , Biomass boilers , Small capacity biomass firing water heating boilers
JSC “GANDRAS ENERGOEFEKTAS” offers boilers for different kind of pellets and wood logs burning.
TECHNICAL DATA
Thermal capacity
automatic boilers: 14 kW - 1163 kW
manual boilers: 29 kW - 930 kW
Fuel
for automatic boilers: wood pellets, agropellets agropellets (for example, cotton waste) , straw pellets , sun flower husk pellets, peat pellets (max. humidity up 25 %).
for manual boilers: wood logs and wood pieces.
These boilers can be used for production of how water with max. temperature 110 C and max. working pressure 6 bar.
| Manual fuel supply boilers | Automatic fuel supply boilers 14-290 kW | Automatic fuel supply boilers 348-1163 kW | ||
![]() |
![]() |
![]() |
||
![]() |
![]() |
![]() |
SHORT DESCRIPTION:
Monoblock design boilers made of steel with smoke tubes have special turbulence promoters to increase boiler operation performance.
Boiler has two separate doors for tube part and combustion chamber inspection.
Fuel supply to the boiler can be in automatic mode or manually.
In case of automatic fuel supply boiler will be supplied with receiving bin, which has fuel level switches, ensuring fuel supply system switching on (in case of fully automatic boiler plant operation) or gives signal to the personal about low fuel level. There is also minimum fuel level switch, achieving which boiler’s automatic system stops it.
It is possible to supply automatic ignition system.
It is possible to supply modulation system, which will keep automatically adjusted outlet water temperature in the same time adjusting quantity of supplied to the boiler fuel and combustion air.
In case of automatic fuel supply, ashes, which appear in the combustion chamber, are removing automatically by means of two screw conveyors to the ashes collecting containers.
Boilers are manufactured in accordance with International standard TÜV CERT and have CE marking.
Warrantee time for these boilers is 2 years.
We are ready to offer You complete boiler plant on turn-key basis with all required equipment:
- Vertical or horizontal silos for fuel storage,
- Moving floors,
- Vertical or horizontal fuel supply to the boiler transporters,
- Boilers with automatic fuel supply and ash removing system,
- Automatic smoke tubes surfaces cleaning system,
- Economizer,
- Multicyclon (smoke filter),
- Chimney,
- Automatic control system (PLC),
- Remote monitoring system
Local boiler plant Kalkuni, Daugavpils, Latvia - 3 boiler with 400 kW heating capacity each.
| Fuel receiving bunker, vertical fuel loading to the storage silo elevator, 80 m3 capacity storage silo. | Boilers with receiving bins and fuel supply transporter | Automatic smoke tubes surfaces cleaning system | ||
![]() |
![]() |
![]() |
||
Equipment , Equipment for boiler houses / power plants , Power plants complete with diesel and gas engines
JSC “Gandras Energoefektas” offers electric power plants complete with diesel and gas engines for electricity and heat production.
Gas and diesel engine sets differ by its reliability and high efficiency values operating in heavy duty conditions. In engines construction are user new very resistant materials, which increase engine lifetime.
Power plants can be supplied like opened or packaged sound-proof units.
We offer:
By customer’s request diesel generator can be completed with:
Cogeneration units on a basis of gas engines with a power range from 65kW up to 3000 kW. We can offer to the customer engine depend on chemical gas composition (gas from dumps, product fermentation or etc.).
Main advantages of gas engines offered by JSC “GANDRAS ENERGOEFEKTAS”:
Co-generation plant with gas engine operating principle Utilizing produced by engine heat it is possible to: - produce hot water for heating systems and technology - produce low parameters steam Also internal-combustion engine could be used in tri-generation process - combined electricity, heat and cold producing, by means of co-generation unit combination with absorbtion cooling plant (chiller).
co-generation sets are fully completed with digital control system, which secures automatic synchronization, units putting into parallel operation and load distribution.
Typical applications




Equipment , Equipment for boiler houses / power plants , Deaerators
Deaerators are used to remove the corrosive gases (oxygen and free carbonic acid) from feeding water of steam generating units and from makeup water of heat and hot water supply systems.
We offer the folowing deaerators types:
* Basing on serial produced deaerators could be designed and manufactured others modifications in accordance with Customer’s parameters.
Wastes sorting line
JSC „Gandras energoefektas” performs a full range of works, concerned with designing and construction of wastes sorting lines with an output starting from 5 000 ton a year. We will provide you with ultimate solutions for the content of the equipment and its’ location according to the size of the facility and your financial possibilities.
JSC ”Gandras Energoefektas” implemented the project on purchasing and implementing wastes sorting line and plastic processing line in Visaginas in 2011.
The purpose of wastes sorting line
Manual wastes sorting into grades ready for its further press and supply.
Main components:
- Feeding conveyor;
- Screening drum;
- Sorting platform with modular room;
- Sorting belt conveyor;
- Discharge belt conveyor (reversible);
- Hydraulic baler;
- Feeding belt conveyor to hydraulic baler;
It is possible to ask for optional equipment to be supplied.
We guarantee:
- Good quality of certified equipment;
- individual approach to each order;
- reasonable price;
- short production terms;
- 12 months warranty;
Feeding chain conveyor is designed to feed unsorted garbage to sorting line. All wastes are moved to the dibhole of the feeding conveyor and later are fed up to sorting belt conveyor. Angle of feeding conveyor inclining reaches 35 degree.
Sorting belt conveyor is mounted on the sorting platform and designed for sortable recyclable materials transportation and hand picking. While selecting appropriate grades worker drops it down to the hopper. Along the sorting conveyor there are working places with chutes. Each working place has emergency stop button. Part of selected material (waste paper, PET, plastics etc.) is going down to accumulating areas through the chutes.
Sorting platform is an essential element of sorting complex, what is necessary for more efficient selection (quantitative and qualitative) of useful grades from the stream. On the sorting platform there are mounted sorting conveyor and working places for workers to select appropriate grades from the wastes mainstream. Sorting platform completed with the modular room and screening drum. Screening drum is designed to sieve wastes stream. In the wastes sorting line screening drum is the first stage of sorting wastes. Operating principle of screening drum is to screen the material from small grades through the drum holes. Modular room is equipped with work places (number of required work places is being defined according to the requested output of wastes sorting line), where each working place has emergency stop button. Room is equipped with heat recuperating ventilation systems and electrical heaters.
Single-chamber hydraulic baler complete with feeding chain conveyor and PET perforator. Working with a paper PET perforator automatically shutdown. Hydraulic baler is automatically controlled with PLC control panel. Single-chamber hydraulic baler is designed to press recyclable materials into bales with specified sizes.
Reversible belt conveyor is designed to transport wastes, which left after selecting useful grades to an opened container, located under the conveyor belt from one side or to transport sorted recyclable material to feeding belt conveyor to hydraulic baler from the other side. Material feeding can be performed to the left or right side, what ensures complex non-stop operation.
Sorted recyclable wastes are feeding to the press by feeding chain conveyor (Z type). Angle of feeding conveyor inclining reaches 35 degree.

UAB „CIE LT FORGE“ 2009 year
The construction of the cooling system of the plant for the production of automotive parts in the city Marijampole.
Design and construction of cooling towers, cooling system pumps with frequency converters, submersible pumps, water treatment equipment, piping made of stainless steel. Execution of pre-commissioning, start-up and plant handover for commissioning.
![]() |
![]() |
![]() |









































